M7 Bradley Fire Support Team Vehicle Carlisle USA

M7 Bradley Fire Support Team Vehicle Carlisle USA

English Translation
Merci à Richard S. Eshleman pour lers photos 

Historique Voir ICI
History Click HERE

L’armée de terre des USA  avait besoin d'un système pouvant tirer en tir indirect avec précision.
Il fut donc developpé un système d'arme qui de tous les sytèmes de l' US army est le moins connu sur le chassis du M 2 Bradley . C 'est le  M7 Bradley Fire Support Team (BFIST),qui permet ces tirs
Le M7 BFIST remplace l'ancien système FIST-V  vieillissant M981  dans certaines unités mécanisées.

 Le véhicule fournit aux équipes sur le terrain un soutien feu au niveau de la compagnie et aux officiers du soutien du bataillon / brigade une plate-forme de véhicule où ils peuvent localiser, planifier, coordonner, exécuter et diriger des tirs d'artillerie (canons et  mortier ) indirects, précis et en temps opportun.
Comme son nom l’indique, le M7 BFIST est  à la base un véhicule de combat Bradley  plus précisement une M2A2 ODS (Opération Desert Storm) modifié, équipé d’un ensemble d’équipement spécialisé pour ce genre de missions ( mission equipment package MEP) .
Il possède la même mobilité, la même capacité de survie et la même signature sur le champ de bataille que la série A2 Bradley, et il possède en tourelle  un canon de 25 mm pour l'autodéfense. Plus important encore, la conception du M7 offre, pour la première fois, la possibilité de «cibler en déplacement».

Le programme M2A2 ODS BFIST remonte au milieu des années 90.  avec des tests de qualification  au cours des deuxième et troisième trimestres de l’exercice 1997. La phase I s’est achevée fin 1997 et le véhicule est adopté mais pour uine petite série ( low rate initial production LRIP). Le contrat LRIP a été attribué au début de l’exercice 1998  et il devait entrer dans les inventaires de l’ US Army en 2000.
Il fut mis en service  à la 3e division d'infanterie basée à Fort Stewart, en Géorgie, puis à Fort Benning, en Géorgie par la 3e brigade de la 3 ID  en janvier 2001. Ensuite il fut  livré à  à Fort Sill, dans l'Oklahoma, au 3rd Armored Cavalry Regiment en juin 2001.

3e US ID	2e US ID	3rd Armored Cavalry Regiment

Au total, ces unités ont reçu un total de 49 véhicules M7 BFIST.  suivit par une autre commande  de 55  véhicules M7 affectés àl a1st Cavalry Division  à Fort Hood, au Texas. et à la  la 2nd Infantry Division en Corée
Le M7 BFIST est basé sur le Bradley  M2. Aussi  il arrive au  Red River Army Depot, au Texas, ou il est totalement nettoyer desossé (  inspect/repair only as necessary IROAN). LDurant cette phase IROAN  il peut bénéficier d'un certain nombre d'améliorations basées sur les RETEX  et on commance à faire les modfications pour le tranformer en  M7.
La tourelle et la coque sont envoyées à lusine deUnited Defense  à York, Pennsylvanie. Après l'inspection à York, tout est  remonté  et les tests  d’inspection finale sont effectués.
Il est envoyé sur le terrain avec la 3ème division d'artillerie d'infanterie nottament au Kosovo
En plus de sa configuration M7 BFIST, les planificateurs de programmes de l'Armée de terre ont rapidement identifié le besoin d'une version «intégrée» du BFIST qui opérerait dans les structures de forces numérisées de l'armée. Cette version devait se nommer  M7A1 mais cela sera in fine le  M3A3 BFIST. dont  deux prototypes  ont été construits dans le cadre d’un contrat de recherche, de développement, de test et d’évaluation signé en 1999, puis mis à l’essai en 2001.Ce système  M3A3 BFIST s’est avéré encore plus précis quer le M7 BFIST
Aussi United Defence a modifié en  M3A3 BFIST  56  chassis qui remplaceront les M981 de la 4e division d'infanterie de l'armée, qui sera donc la première division numérisée de l'US Army.

Article tiré de ce site

The Army has long had a need to deliver precision indirect fires. Yet recent political debates have spotlighted that need to the point that “precision fires” are suddenly becoming part of the public lexicon—debated on the OpEd pages of local newspapers, summarized in television sound bites and discussed over the radio airways.
Ironically, one of the U.S. Army’s lesser known battlefield systems, the M7 Bradley Fire Support Team (BFIST) vehicle, has been setting new standards of precision target location and controlling precision indirect fires for the last few years. To summarize it for public sound bite consumption: The M7 BFIST enabled precise indirect fires before they became fashionable.
The M7 BFIST replaces the aging M981 “hammerhead” fire support team vehicle (FIST-V) in selected mechanized units. The vehicle provides company fire support teams and battalion/brigade fire support officers with a vehicle platform where they can locate, plan, coordinate, execute and direct timely, accurate, indirect field artillery and mortar fires.

As the name implies, the M7 BFIST is a modified M2A2 ODS (Operation Desert Storm) Bradley fighting vehicle that has been equipped with a specialized fire support mission equipment package (MEP). In addition to providing the critical fire support teams with the same mobility, survivability and battlefield signature as the A2 series Bradley, the M7 provides fire support teams with a 25 mm cannon for selfdefense. Most important, the M7 design provides, for the first time, the ability to “target on the move.”

The M2A2 ODS BFIST program dates back to the mid-1990s with the initial vehicle designs completing preproduction qualification testing and limited user testing during the second and third quarters of fiscal year (FY) 1997. The Phase I effort culminated on the last day of FY 1997 when the vehicle was approved for low rate initial production (LRIP). The LRIP contract was awarded early in FY 1998 and led to the production and delivery of the initial vehicles.

According to Carl Sullinger, M7 BFIST program manager at United Defense LP, the M7 BFIST vehicles began entering Army inventories in 2000. “Essentially they were dribbling in nine at a time with each direct support artillery battalion receiving nine vehicles,” he explains. “That’s one to go with each maneuver company.”

Initial fielding went to the Army’s 3rd Infantry Division. Fielding of the vehicles began at Fort Stewart, Ga., and moved to Fort Benning, Ga. (3 ID’s 3rd Brigade is at Fort Benning) in January 2001. Fielding followed  to Fort Sill, Okla., in March 2001 and to the 3rd Armored Cavalry Regiment in June 2001.

All together, those units received a total of 49 M7 BFIST vehicles. “Then there was a fielding hiatus due to funding stream issues,” Sullinger continues. “That meant that we had to pull all of our fielding teams out of the field, essentially, in September 2001. And we’re just now reforming the teams to support the fielding again. We’re now in production of the last 55 M7 vehicles and we’re getting ready to start fielding those to the 1st Cavalry Division at Fort Hood, Texas. We’ll also field those vehicles to the 2nd Infantry Division in Korea,” he says.

In late May, the first two vehicles were at Fort Hood with the full buildup projected by the end of July. New equipment training will occur during August with fielding handover projected for September.

bradley-fire-support-team-vehicle-2.jpg

The M7 BFIST, initially assigned to the 3rd Infantry Division at Fort Stewart, GA., has the unprecedented ability to "target on the move."

The M7 BFIST configuration begins life as an M2 series Bradley fighting vehicle. At Red River Army Depot, Texas, the vehicle undergoes a cleanup and an inspect/repair only as necessary (IROAN) process. The IROAN efforts include a number of enhancements based on depot knowledge and experience. Preliminary work is also conducted for installation of the M7 hull communications station. “Red River has worked in a great team effort with our manufacturing facility in York,” Sullinger says.

To highlight the team effort, he explains that following the depot activities, the turret and hull are sent to the United Defense facility in York, Pa. After inspection at York, the turret is reassembled; the hull communications station is installed, and all final inspection reporting, testing and observations are conducted. The company also performs what Sullinger describes as “a very thorough longrange targeting test on targets that are as much as five miles away.”

Sullinger is also quick to praise the early M7 field experiences and investigations of the 3rd Infantry Division Artillery (DivArty). The unit has already conducted four M7-equipped rotations at the National Training Center. (M7s also went to Kosovo with the 3rd ID.)

“They have really tried to take advantage of the new capabilities,” he says. “In fact, they are paving the way for the Army to develop new TTPs [Tactics, Techniques and Procedures] to fully exploit this potential. The 3rd DivArty has just provided incredible support and been amazingly innovative in exploring targeting on the move and precision fires.”

In addition to the M7 BFIST configuration, Army program planners were quick to identify the need for an “embedded” version of the BFIST that would operate within the Army’s digitized force structures. Early plans called for that variant to be designated M7A1. Recent funding and program decisions, however, have changed the designation to M3A3 BFIST.

Two prototypes of the digitized M3A3 BFIST design were built under a 1999 research, development, test and evaluation contract with subsequent fielding tests in 2001.

“It’s essentially an M3A3 with the M7 hull communications station and some software changes,” Sullinger says. “There is some hardware and some new electrical work although the majority of the effort involves software.

But the M3A3 BFIST turned out to be even more accurate at long ranges than the M7 BFIST. Quite honestly you would give credit for that to the [M3]A3 program because they did all of the preliminary work. What we did was to ‘tweak’ the software, introduce a new boresight procedure and move the inertial navigation unit from the hull to the turret.”

He notes that United Defense has already prepared a contract modification proposal for the M3A3 BFIST for the fielding of 56 digitized/embedded variants. Those systems will initially replace the M981s currently supporting the Army’s 4th Infantry Division, the Army’s “First Digitized Division.” In addition to the reliability, mobility and survivability benefits inherent in the new chassis, Sullinger summarizes the program’s impact by noting, “The Soldiers have the ability in the M7 and M3A3 BFIST to target on the move. They have never had anything like that before.”

“The second aspect involves precision fires,” he adds. “This is a very accurate system, traditionally giving the target in eight-digit coordinates right off. The 3rd DivArty has demonstrated on several occasions that the M7 has the ability to put precision indirect fires on the target with standard munitions. And by precision I mean within 50 meters at a range of 8,000 meters from the vehicle. Now that’s precision fires.”